Shotkit / Example / 9:16 software launch
Brightdock: the deploy log your team can read
Fictional brand.Brightdock was made up for this example. It is not a client and not a real company.
- Brand
- Brightdock (fictional)
- Format
- 9:16 software launch
- Shots
- 6
- Prompt rounds
- 0
- Run date
- 2026-11-19
- Shotkit
- 3.6.0
- Generators
01 / The brief
The brief, as typed.
20-second 9:16 launch video for Brightdock. Draw the product screens, do not generate them. No voiceover. Use brand/brightdock.md as the brand lock.
Shotkit wrote the storyboard, the shot specs and the on-screen text from this brief and the brand lock below.
02 / Brand lock
The brand, frozen for this run.
Every prompt and every critique in this run was written against this palette and this type.
Palette
- #0B0D10
Background
Near-black, the ground of every frame
- #F4F5F0
Ink
Off-white, all headline type
- #C8F250
Accent
Lime, one accent per frame: a live status, a button, the mark
- #8A9099
Muted
Grey, secondary text inside the product
- #232830
Rule
Panel borders and dividers
Type
- Display font
- Bricolage Grotesque ExtraBold 800
- Body font
- Inter Medium 500
03 / Preview
The preview Shotkit wrote.
The run’s preview.html: every shot, its frame, its on-screen text and its verdict, in one file you can hand to an editor.
04 / Shot plan
The shots, from shots.json.
6 shots across 20 seconds at 9:16, on the educational-demo beat framework.
| Shot | Time (s) | Beat | Framing | Angle | Motion | Subject |
|---|---|---|---|---|---|---|
| shot_01 | 0.0 to 3.0 | problem | WS | eye-level | static | a wall of raw deploy log lines in grey monospaced type filling the lower two-thirds, one line marked in red where a health check failed, the lines fading out at the top and bottom |
| shot_02 | 3.0 to 6.5 | reveal | MS | eye-level | static | the Brightdock deploy list: a panel headed Deploys with six rows, each a deploy number, what it was, the service, who shipped it and when, a lime dot for live and one amber row that was rolled back |
| shot_03 | 6.5 to 10.0 | walk-through | CU | eye-level | static | one deploy open: the number 214 set very large, the service name beside it, a lime live status, then three changes each with lines added and removed, and who merged it |
| shot_04 | 10.0 to 13.5 | walk-through | CU | eye-level | static | a deploy that failed its health check, marked with a red dot, a wide lime button to roll back to the deploy before it with a cursor on it, and under it a line with a tick saying the earlier deploy is live again |
| shot_05 | 13.5 to 16.5 | walk-through | MS | eye-level | static | three notices stacked and fading back: the newest says deploy 214 is live and who shipped it, the ones behind it say an earlier deploy was rolled back and another went live |
| shot_06 | 16.5 to 20.0 | result | MS | eye-level | static | the Brightdock mark, a lime rounded square with three dark bars, centred in the lower half with the product name under it on the near-black ground |
05 / Frames and verdicts
What the critic said, shot by shot.
The frames were made in an image generator from Shotkit’s prompts. Shotkit’s critic checked each one against its shot spec and the brand lock. 6 of 6 shots ACCEPT, after 0 rounds.
Verdict by shot
- shot_01R1ACCEPT
- shot_02R1ACCEPT
- shot_03R1ACCEPT
- shot_04R1ACCEPT
- shot_05R1ACCEPT
- shot_06R1ACCEPT
See every round, frame by frameHide the rounds
Round 1
shot_01ACCEPTThe log lines are about 30 px tall at 1080 wide. A phone viewer can read the red line and not much else.
shot_02ACCEPTRow 212 carries an amber dot and an amber Rolled back label. Amber is not in the palette.
shot_03ACCEPTThe panel ends about 70 percent down and the rest of the frame is empty.
shot_04ACCEPTThe button and the line that says the roll back is done are in one picture. They are two moments.
shot_05ACCEPTThe third notice is at about 38 percent opacity and its second line is hard to read.
shot_06ACCEPT
06 / Run this yourself
The same brief, on your machine.
Install Shotkit, restart Claude Code, then type the brief below into a session.
git clone https://github.com/whystrohm/shotkit.git
cd shotkit && ./install.sh20-second 9:16 launch video for Brightdock. Draw the product screens, do not generate them. No voiceover. Use brand/brightdock.md as the brand lock.A model writes the plan, so your storyboard will not match this one word for word.
New to Shotkit? Start with the install guide and the quickstart. The source is on GitHub.
Other examples
- Kestrel Roofing (fictional brand), 30s 16:9 adKestrel Roofing: a 30-second 16:9 adA 30-second ad for a fictional roofing company, shot to look like real life: the drip, the damaged roof, the crew and trucks arriving, the work, the finished house. Three frames and one clip went back before the critic accepted them.
- WhyStrohm, 30s 16:9 filmMedia Tsunami: a 30-second 16:9 filmA 30-second film for WhyStrohm, planned with WhyStrohm's own brand pack. Seven shots: a wave of media, one funnel, one grid. Two shots went back for a second round before the critic accepted them.
Want it done for you? Get your company film